Hard Hat Imprinting Guide

Bullhead Hard Hat Imprinting Guide

Click here to download PDF.

Custom logo imprinting

Artwork Guidelines

Provide camera ready artwork in a vector based format. Preferred file formats are outlined .ai and .eps, however .pdf and high resolution pixel based formats (.eps, .tif, .psd) are acceptable. Additional fees may apply to mock up logos.

Standard colors only, special colors add an additional cost. Please allow a 10 business day lead time per order after proof has been approved.

Color Guidelines

Choose one to four colors from our stock offering located on page two (of the downloadable PDF). If your desired color/colors are not a stock color, please include the PMS (Pantone Matching System) color values with your logo for accuracy purposes. If PMS values are not provided we will choose the closest color possible. Keep in mind, this leaves room for minor variances in color.

The imprint area on a full brim or cap style hard hat is generally a 3 inch wide x 2.25 inch high area on the front, back or either side of the hard hat. The imprint area on a bump cap hat is a 1.5 inch wide x 1.5 inch high area on the front, and generally a 3 inch wide x 1.5 inch high area back or either side of the bump cap. Depending on the orientation of your logo it may not be able to fill the entire imprint area due to the curvature of the hard hat's surface. Our imprinting professional will configure your provided artwork on the hard hat to ensure optimal sizing and a proof will be provided for you.


Full Brim Hard Hat
Front, Back and Sides Imprint Area:
3 inch W. x 2.25 inch H.

Full Brim Hard Hat

Cap Style Hard Hat
Front, Back and Sides Imprint Area:
3 inch W. x 2.25 inch H.

Cap Style Hard Hat

Bump Cap
Back and Sides Imprint Area:
3 inch W. x 1.5 inch H.

Bump Cap Side

Front Imprint Area:
1.5 inch W. x 1.5 inch H.

Bump Cap Front

Available hard hat/Bump Cap Colors:

Not all styles are available in all colors

Available Hard Hat Bump Cap Colors

Please Note: Hard hats/bump caps are available in a variety of colors, to ensure your logo will be readable after print, it is best to choose a hard hat of a contrasting color or have your logo printed in a solid contrasting color such as black or white. When printing on a colored hard hat, the color of the hard hat may slightly alter the ink color. Although we check for errors, it is your responsibility to notify us of any changes prior to production. Check for spelling and spacing, as we are unable to accept any liability for errors and omissions once the proof has been approved. If any amendments or alterations are required, please indicate CLEARLY before approving the proof that will be provided. Custom printed products are non-returnable.